Fan-shaped flat spray nozzle
Type: Fan-shaped flat spray nozzles
Flat spray with perfect atomizing effect and very uniform distribution at all pressures.
The spray pattern is flat, fan-shaped without hard edges to ensure even surface spreading of fluid in cases of overlapping adjacent sprays in their
installed set-up. The solid stream type, has a needle shaped spray pattern with a strong impact at all pressures.
0° (Solid stream spray pattern) - 15° - 20° - 25° - 30° - 40° - 45° - 50° - 60° - 65° - 80° - 90° - 95° - 100° - 110° - 120°
The spray tip has the advantage of being interchangeable with any other tips and can be fixed by using their retainer caps on various types of bodies,which can be either male or female, or applied on welding nipples. For tips of low capacity, a strainer can be used, in order to avoid any eventual problems of obstruction. The flat spray is pre-set at 5° to the tube axis. Such assembly method guarantees a perfect alignment of the sprays, without any interference of one with the other, thus obtaining a perfectly uniform distribution also on overposed points and minimizing installation and maintenance time. The fittings on which the above tips can be applied, are Gas tapered (BSPT - UNI 339) threaded. Other threadings available upon specific request are: NPT, Gas parallel (BSPP - UNI 338), etc. There is a vast range of angles and flow rates for the above mentioned tips. The coloured plastic R1N tip series are most commonly used for agricultural purposes and their code numbers range from 1 to 70. They are moulded with various plastic materials (Hostaform, polypropylene and kematal) to provide spray angles of 80° or 110° and their chosen colours conform to the standard ISO norms.
Brass, Mild Steel, Stainless Steel AISI 303, Stainless Steel AISI 316 and PVC. Other materials are available upon specific request,
Download product specifications and technical data sheets in PDF
